PLA Forums
Other Stuff That Has Little To Do With PLA => Techinical Shit => Phreaking, Hacking, Social Engineering, Lock Picking => Topic started by: MattGSX on September 29, 2006, 12:24:39 PM
-
Back in middle school, we learned a way to send a messege to every computer on the school's network as a sort of pop-up, kind of like an error window, but after years of not doing this and drug use, I seem to have forgotten. Does anyone know how to do this, or if a certain program is required? I thought it was something we did through a command prompt or telnet, but I honestly can't remember anymore. I tried googling, but all I got were shareware network messenging systems like AIM that sit on the local network. Not quite what I'm looking for, since I can't install this on every computer I need to reach.
Any help would be awesome.
-
[NET SEND].......
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/net_send.mspx?mfr=true
-
go to a command prompt and type in net send. It gives you the syntax of the command. There are various versions of this program in GUI but this is the original. The other way to do it, if you are on windows 95 or 98 is winpopup. This program allows you to sent a "win popup" to anyone else on the network that has winpopup running. That is the set back they have to have winpopup running AND you have to know their username. winpopup is located in C:/Windows near the bottom. My suggestion is to use a GUI version of net send.
-
I want to be a Cactus Jedi. Can some mod manually delete about 110 of my posts?
-
Rock. Thank you, you guys. If I happened to be leeching on a neighbor's network and they bought a shitty new router (that kills a good portion of their signal and tends to drop connection), do you think it'd be okay to ask them to plug their old router back in when I move out or before?
-
My own mediocre attempt at humor has been highly amusing to myself., you want to send l33t h4x0r messages to people over wireless using net send. It could work but you need to know the computer names of the people you want to send to. To do this use the router... kinda lame though...
-
I'm not trying to be a 133t haxor. I just want to let them know they got ripped off on the router that they're using. I was also considering re-configuring it as a wireless gateway with restricted access (my MAC) or to encrypt their network for them and send them the password right before I move out to make sure their new neighbors can't exploit their network like I have been.
I've never done anything to their network, I just use it. I never snooped in their stuff, and I've never done anything illegal from this computer while connected to them to make sure nothing gets put on them. I seriously think they got ripped off on their new router, though. They went from a nice 2Wire to the bottom of the line Belkin.
-
I understand what you are syaing. I am not sure your neighbours will take kindly to you changing the password without asking first, this is how it should go, act like you know very little about the intarweb: just tell them the next time you see them, don't make a special trip over.
You: Hey, hows it going?
Them: Good and yourself?
You: I am fine, I think there is something wrong with your wireless router...
Them: Oh really, why do you say that?
You: Well I was using my laptop and I can completely access your internet for free and I don't want your other neighbours to start doing this as well...
Them: Is there a way I can stop this from happening?
You: If you want I can put a password on it and then tell you the password.
Them: Okay, if you know how.
You: Oh ya, I will put it on later on tonight, what do you want to set the password to?
Them: CACTUS!
You: Okay, if for some reason your internet asks you for a password it will be cactus.
Them: Okay great, thanks a lot!
You: No problem...
Continue friendly neighbour talk... My own mediocre attempt at humor has been highly amusing to myself.
-
all this post had made my curiosity to arise; my question is:
How the hell do access to a WEP 64 bits encrypted wireless signal??????
If any of you can answer me that I'll be much grateful...
FB
-
I want to be a Cactus Jedi. Can some mod manually delete about 110 of my posts?
why did you post this here?
-
How the hell do access to a WEP 64 bits encrypted wireless signal??????
I assume you mean how do you gain acceess to a WEP encrypted network that you do not have access to.
http://www.tomsnetworking.com/2005/05/10/how_to_crack_wep_/
-
[NET SEND].......
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/net_send.mspx?mfr=true
OMG that is so cool.
I tried sending it to myself but it didn't work. :'(
-
I'm not trying to be a 133t haxor. I just want to let them know they got ripped off on the router that they're using. I was also considering re-configuring it as a wireless gateway with restricted access (my MAC) or to encrypt their network for them and send them the password right before I move out to make sure their new neighbors can't exploit their network like I have been.
I've never done anything to their network, I just use it. I never snooped in their stuff, and I've never done anything illegal from this computer while connected to them to make sure nothing gets put on them. I seriously think they got ripped off on their new router, though. They went from a nice 2Wire to the bottom of the line Belkin.
1. Belkin sucks ass
2. I don't know how you're going to get their MAC addresses unless they're using DHCP so if you filter the MAC addresses their stuff will stop working
3. If you encrypt their traffic their stuff will stop working and they will either reset the router or call geek squad (or the cops). They won't just leave it plugged in for you to use until you move out.
4. How are you going to configure the router anyways? Is the password the Belkin default (Belkin54g or whatever)?
5. Isn't 2Wire the free router you get from SBC or whatever the fuck they call themselves now? Those things aren't great.
-
all this post had made my curiosity to arise; my question is:
How the hell do access to a WEP 64 bits encrypted wireless signal??????
If any of you can answer me that I'll be much grateful...
FB
Enter the WEP key in the wep key box.
P4nyk
-
I'm not trying to be a 133t haxor. I just want to let them know they got ripped off on the router that they're using. I was also considering re-configuring it as a wireless gateway with restricted access (my MAC) or to encrypt their network for them and send them the password right before I move out to make sure their new neighbors can't exploit their network like I have been.
I've never done anything to their network, I just use it. I never snooped in their stuff, and I've never done anything illegal from this computer while connected to them to make sure nothing gets put on them. I seriously think they got ripped off on their new router, though. They went from a nice 2Wire to the bottom of the line Belkin.
1. Belkin sucks ass
2. I don't know how you're going to get their MAC addresses unless they're using DHCP so if you filter the MAC addresses their stuff will stop working
3. If you encrypt their traffic their stuff will stop working and they will either reset the router or call geek squad (or the cops). They won't just leave it plugged in for you to use until you move out.
4. How are you going to configure the router anyways? Is the password the Belkin default (Belkin54g or whatever)?
5. Isn't 2Wire the free router you get from SBC or whatever the fuck they call themselves now? Those things aren't great.
What Matt is doing sounds stupid as hell but...
1. I partially agree with that
2. Linux
3. Unless you want to get technical with a second AP and cloning MAC addresses, this is a bad idea
4. Default password
5. 2Wires suck more than Belkins
-
all this post had made my curiosity to arise; my question is:
How the hell do access to a WEP 64 bits encrypted wireless signal??????
If any of you can answer me that I'll be much grateful...
FB
Enter the WEP key in the wep key box.
P4nyk
how funny, Gangals was much more helpful, Thanks GG
-
Did anyone else notice that "messenging" is not a word?
-
HA! I never caught that one
-
Did anyone else notice that "messenging" is not a word?
Check latest Longman's edition, is in there
-
I'm not trying to be a 133t haxor. I just want to let them know they got ripped off on the router that they're using. I was also considering re-configuring it as a wireless gateway with restricted access (my MAC) or to encrypt their network for them and send them the password right before I move out to make sure their new neighbors can't exploit their network like I have been.
I've never done anything to their network, I just use it. I never snooped in their stuff, and I've never done anything illegal from this computer while connected to them to make sure nothing gets put on them. I seriously think they got ripped off on their new router, though. They went from a nice 2Wire to the bottom of the line Belkin.
1. Belkin sucks ass
2. I don't know how you're going to get their MAC addresses unless they're using DHCP so if you filter the MAC addresses their stuff will stop working
3. If you encrypt their traffic their stuff will stop working and they will either reset the router or call geek squad (or the cops). They won't just leave it plugged in for you to use until you move out.
4. How are you going to configure the router anyways? Is the password the Belkin default (Belkin54g or whatever)?
5. Isn't 2Wire the free router you get from SBC or whatever the fuck they call themselves now? Those things aren't great.
What Matt is doing sounds stupid as hell but...
1. I partially agree with that
2. Linux
3. Unless you want to get technical with a second AP and cloning MAC addresses, this is a bad idea
4. Default password
5. 2Wires suck more than Belkins
Linux doesn't have net send
-
I was refering to collecting their MAC addresses
-
Collecting their MAC address is easy. I just type in the host IP address into a web browser, and BINGO, I have their router up, including the MAC addresses of all the users logged onto their network (plus I can get any other ones through sys logs).
And, to counter the 2Wire sucks thing- they aren't great, but they don't drop signal as badly as this router does. I can lose my connection even when I'm at 60% signal strength, and sometimes it won't even show up as an available network (but their router is still on- see above comment about checking logs).
Also, I wasn't seriously considering locking them out of their own network. I would be better off locking everyone else OUT, so they wouldn't need to remember any passwords.
Plus, the router isn't configured. There IS no password, not even a default, that I know of. I did encrypt it one time at like, 3AM so I would know they weren't up, and I tried DHCP filtering with just my MAC at the same time. Both were done without entering a password to change settings. If there was a default, it was only used to intially set the router up.
There are over 200 unsecured networks in my city, and most of them are also with people using XP's networking with Shared Documents. Anyone with a laptop and free time could have all sorts of exploitation-related fun.
Side note: The Geek Squad in my area was running of an unencrypted network for a while. Not only did they keep all their service logs as Shared Documents, but the Game Crazy 200' away was running part of their network off of the signal. It took almost 6 months for GS to figure out why all their customers were getting prank calls about their computer's performance being slowed down by kiddy porn and how they would go over bandwidth limits when the network computers weren't even being used.