PLA Forums
Other Stuff That Has Little To Do With PLA => Techinical Shit => Phreaking, Hacking, Social Engineering, Lock Picking => Topic started by: Alpha Omicron on November 26, 2006, 04:07:16 PM
-
http://leoricksimon.blogspot.com/2006/04/telephone-fm-transmitter.html
Transmits audio from telephone at FM frequency. Parts list and circuit diagram included.
-
Subject to major freq drift due to power level, temp etc etc.... Use the guts from a baby monitor.
-
Use the guts from a baby monitor.
Ohh! Do tell! Is there a circuit somewhere? If not, i think i could manage making one with an audio transformer from radio shack, but how do you keep the phone co. from seeing an extension as off hook? OH! nevermind. wrap a ferrite with copper and clip that on to one lead of the phone wire. You would never even know it was there due to no voltage drop, etc...
-
As long as you use a high impedance audio transformer coupled to the line via a couple of 200V+ non-polar caps, there should be no change detectable on the line.
That reminds me, there used to be an old number you could call... I think it was from panel-office served phone lines, what you could call and it would drop your line from the exchange for a minute or so. Great to test for phantom devices attached to your line (line-to-line resistances and capacitance changes)
-
sorry for my last post, i was in a rush to leave. Here is a link to the type of tap i was trying to explain. Just wire in in place of the microphone or in parallel with a switch, and you have room and phone monitoring.
http://www.unterzuber.com/tap.html
(sorry, i dont know if thats a website you guys dont like- i just found it on google)
As long as you use a high impedance audio transformer coupled to the line via a couple of 200V+ non-polar
Do you have a circuit diagram? A link even? Thanks