« previous next »
Pages: [1]

Author Topic: Loop Numbers  (Read 9609 times)

Offline N01zii

  • Junior Phone Loser
  • **
  • Posts: 43
  • 1337 13V3L: +1/-1
  • 21st Century Phreakin'
Loop Numbers
« on: December 21, 2012, 04:33:59 PM »
So, I have a few loops that I've found in my area code.

I had a question though: Why can't I find the other end of the loop?

Take this one for example: 248-460-9996

You hear the tone being blasted like what's supposed to happen when you call into the one side of the loop, but then I can't find the other side of the loop anywhere.

Whenever I call any loops in my area code, there's never another side to them, and I've found six or seven.

Upon calling 9997, you get a busy signal. On other loops, you get the "I'm sorry, this number has been disconnected", and on some it's just  a person's phone number that rings and everything.

Any idea where I could find the other end of these loops?

Also, for your troubles:

ANAC (Tells you your number) - 1-800-444-4444
Elevator at the DEFCON hotel - 1-800-634-6753
Elevator in Florida - 727-551-9889
Elevator in Texas - 214-575-3192
Loop - 707-374-0020 (Other side unknown)
Loop - 707-374-0049 (Other side unknown)
Loop - 707-374-0024 (Other side unknown)
Loop - 248-360-9996 (Other side unknown) - Found by me
Loop - 248-460-9996 (Other side unknown) - Found by me
Loop - 248-560-9996 (Other side unknown) - Found by me
Loop - 248-960-9996 (Other side unknown) - Found by me
Loop - 248-461-9996 (Other side unknown) - Found by me
Loop - 248-661-9996 (Other side unknown) - Found by me
Loop - 248-267-9996 (Other side unknown) - Found by me
Loop - 248-567-9996 (Other side unknown) - Found by me
Loop - 248-269-9996 (Other side unknown) - Found by me
Loop - 248-369-9996 (Other side unknown) - Found by me
Loop - 248-569-9996 (Other side unknown) - Found by me
Loop - 248-669-9996 (Other side unknown) - Found by me
Weird pitch fax number? - 248-769-9996 - Have no idea what it is, a few high pitched tones then disconnected - Found by me
Weird pitch fax number? - 248-869-9996 - Same as 769-9996 - Found by me
Weird skipping message - 248-469-9996 - Found by me - "to work with your grou- 36, 36, 36, 36, 36, 36" Other times completely silent. - Found by me
All Circuits Busy Message - 248-665-9996 - Found by me
Working Ringback (as of 12/21/12) - 847-765-1008 - Found online somewhere

I understand that a lot of these have been posted here, but it's nice to organize them into one place I guess, haha.
« Last Edit: March 26, 2013, 08:56:32 AM by N01zii »
Logged

Offline rbcp

  • Head Custodian
  • Administrator
  • Ninja Phone Loser
  • *****
  • Posts: 5259
  • 1337 13V3L: +454/-81
  • I'm not stupid! I'm not stupid! Hematology!
    • Homepage
Re: Loop Numbers
« Reply #1 on: December 22, 2012, 06:21:05 PM »
I've seen loops before where a single phone number is both sides of the loop.  Have you tried calling the number twice at the same time?
Logged

Offline xhausted110

  • Newb
  • *
  • Posts: 5
  • 1337 13V3L: +0/-0
  • Low-level employee
Re: Loop Numbers
« Reply #2 on: December 24, 2012, 12:56:48 PM »
on the expanded announcement system, try 1234# it should let you in.
Logged

Offline N01zii

  • Junior Phone Loser
  • **
  • Posts: 43
  • 1337 13V3L: +1/-1
  • 21st Century Phreakin'
Re: Loop Numbers
« Reply #3 on: December 26, 2012, 05:44:35 PM »
Calling both sides didn't work, unfortunately. Still same tone on both phones.

Also, thanks for the passcode! With some quick googleing, is it true I can change recorded error messages with this?!
Logged

Offline xhausted110

  • Newb
  • *
  • Posts: 5
  • 1337 13V3L: +0/-0
  • Low-level employee
Re: Loop Numbers
« Reply #4 on: January 02, 2013, 08:44:38 AM »
yes. but it is likely that you will get caught if you do. if they record your ANI.
Logged

Offline AmishGangsta

  • =/\=
  • Phone Loser Abuser
  • *****
  • Posts: 240
  • 1337 13V3L: +16/-3
  • DU WERDEST EINEN KRANKENSCHWESTER BRAUCHEN!!!
Re: Loop Numbers
« Reply #5 on: January 02, 2013, 01:58:13 PM »
Are there still "blank"/test numbers that you can call and just sit on the line with no activity?
Logged
The only acceptable form of commerce is a proper and shady cash-only weapons deal.

"If there's anything i know, it's that people listen to a guy with a yardstick." - Richard Cardo

I didn't dial the wrong number, you picked up the wrong phone.

Offline N01zii

  • Junior Phone Loser
  • **
  • Posts: 43
  • 1337 13V3L: +1/-1
  • 21st Century Phreakin'
Re: Loop Numbers
« Reply #6 on: January 02, 2013, 04:27:37 PM »
Quote from: AmishGangsta on January 02, 2013, 01:58:13 PM
Are there still "blank"/test numbers that you can call and just sit on the line with no activity?

Yeah, I've found a few of them here and there.
Logged

Offline Deano252

  • Junior Phone Loser
  • **
  • Posts: 35
  • 1337 13V3L: +3/-1
Re: Loop Numbers
« Reply #7 on: February 05, 2013, 04:42:23 AM »
this might seem obvious but did you try going one number up or down from the loop line?

ie 707-374-0020 (Line A) 707-374-0021 or 0019 for Line B?
Logged
Sometimes when you cry, no one sees your tears.
Sometimes when you are worried, no one sees your pain.
Sometimes when you are happy, no one sees your smile.
But fart just one time....

Offline N01zii

  • Junior Phone Loser
  • **
  • Posts: 43
  • 1337 13V3L: +1/-1
  • 21st Century Phreakin'
Re: Loop Numbers
« Reply #8 on: March 26, 2013, 08:57:23 AM »
Yeah, I had tried that before. Still didn't work. It's annoying, I really wish I could have some working loops on my hands.  :P
Logged

Offline smpl

  • Newb
  • *
  • Posts: 3
  • 1337 13V3L: +0/-0
  • Low-level employee
Re: Loop Numbers
« Reply #9 on: September 02, 2013, 08:09:00 PM »
I tried dialing a few of those numbers and they just sound like milliwatts (1004hz) to me. The are probably not loop numbers.
Logged

Offline N01zii

  • Junior Phone Loser
  • **
  • Posts: 43
  • 1337 13V3L: +1/-1
  • 21st Century Phreakin'
Re: Loop Numbers
« Reply #10 on: December 07, 2013, 01:26:26 AM »
Quote from: smpl on September 02, 2013, 08:09:00 PM
I tried dialing a few of those numbers and they just sound like milliwatts (1004hz) to me. The are probably not loop numbers.

So what would the point be of having random milliwatt lines sitting on a ton of XXX-XXX-9996 lines? I've found tons of them, can't really seem to find a reason as to why.

Also, what would a true loop line sound like then? Any different?
Logged
Pages: [1]
« previous next »